Home>Products>GPPE Manual Receipt/Label Paper Surface Rewinder

GPPE Manual Receipt/Label Paper Surface Rewinder

GPPE Manual Receipt/Label Paper Surface Rewinder

Operator Responsibilities Each Cycle
The operator is responsible for loading cores, placing the mandrel into the rewinding station, cutting the tails, wrapping the tails around the cores, tucking the tails, winding the rolls to the desired length, and transferring the finished rolls to a packing table. The operator dictates the cycle time.

Standard Features(in addition to the previously identified GPPE features):
1. Manual mandrel insertion system.
2. Manual tail cutter.
3. Manual gluing/tapping.
4. Manual roll packing.
5. This manual surface rewinder can be upgraded to 2-ply configurations.

Optional Features
Flexographic printing
It is used for online printing when slitting rolls, paper accumulation buffer keeps the printing nonstop during the cycles gap, up to 4 color on-line printing.

Double web system
By adding an additional unwind stand and the dual web package, the operator can load two narrow width master rolls into this semi-automatic surface rewinder and process both rolls simultaneously. This allows the operator to maximize slitting efficiency when processing long runs of narrow width master rolls.

Critical Specifications

Maximum Web Speed (1-Ply)
2300fpm (300mpm)
Maximum Web Speed (2-Ply) (optional)
1200fpm (120mpm)
Maximum Web Width
54inches (1100mm)
Maximum Unwind Roll Diameter
50inches (1270mm)
Maximum Unwind Roll Weight
3303lbs (1500kg)
Minimum Rewind Diameter (option for 1.18” (30mm) is available)
1.50inches (38.1mm)
Maximum Rewind Diameter
12inches (200mm)
Minimum Rewind Core O.D.
0.5inches (12.7mm)
Maximum Rewind Core O.D.
1inches (25.4mm)