Usage:
Perfectly suit flexible & short-run jobs
GP-Sticker JET120 can print different job continually in high speed with most VD software.The operation is very simple through highly integrated driving system to realize the cost-effective and customized digital printing.

Features:
- Circulating ink path: improves stability during continuous printing and prevents ink from settling, especially white ink;
- Ink dot accuracy: minimum 3.5PL, printing finer than Kyocera nozzles;
- Splicing method: Seamless splicing structure, printing the same color at the same time, eliminating the influence of two nozzles printing sequentially and color fluctuations between each other, and the effect is good;
- Nozzle hole arrangement: 300lpi manufacturing accuracy, 1mm spacing between two rows of holes. Compared with Kyocera, it is not easy to draw and has little impact on material angle deviation, so it can print very narrow materials (the more nozzle holes arranged, the smaller the number of holes in each row) The front printing will have an impact on the subsequent printing, and the easier it is to produce wire drawing);
- Nozzle control: Open the waveform adjustment function, allowing different manufacturers to adjust parameters according to the actual situation of the equipment, instead of being limited by the upper limit of the technical personnel of the nozzle manufacturer;

Specification:
Jet: EPSON-S3200
Max speed.30m/min

UV ink
Printing paper: including but not limited to various self-adhesive labels, PP, PE, non-woven fabrics
Print quality: Output resolution 2400X600dpi/ 1200X 600dpi/ 600X600dpi
Maximum width: 120mm
Detection method: black mark and die-cutting gap
Paper thickness: 0.13-0.33mm
Paper feeding method: roll to roll
Unwinding outer diameter max.300mm


Ink cartridge color: 1 - 4 colors
Cartridge size 1500ml
Power supply Standard 220V
Energy consumption 1500W
Interface network port
touchscreen